Car GPS Navigation HUD 2 IN 1 OLED Screen OBD OBD2 Scanner On-board Computer Bluetooth Live GPS Speedometer Windshield
The smart on-board HUD is a head-up display device that connects the ECU of car and mobile phone. This product is installed above the dashboard and displays the navigation information of the car or mobile phone on the HUD through Bluetooth transmission. The display, including speed, fuel consumption, water temperature, etc., it allows driver to focus on the road a​head, providing the driver with a safer and more technological driving experience.
Speed units can be switched freely in miles and kilometers
OLED (Organic Light-Emitting Diode) is an organic light-emitting diode, which is a new product on mobile phone OLED
OLED display technology is different from the traditional LCD display method. No backlight is required, and a very thin organic material coating and glass substrate (or flexible organic substrate) are used. When an electric current passes through, these organic materials will emit light. And the OLED display screen can be made lighter and thinner, the viewing angle is larger, and can significantly save power consumption.
Countries covered by navigation :
​Vehicles cover:
US 12V cars which made after 2000.01.01
EU 12V petrol cars which made after 2004.01.01
EU 12V diesel cars which made after 2004.01.01
Asia 12V cars which made after 2009.01.01
How to install:
1. Insert the OBD plug into the OBD interface of the vehicle.
2. Start the vehicle and plug the other end of the OBD power cable into the power socket on the back of the HUD.
* The vehicle OBD position is generally as shown in the figure. Tips: The Bluetooth HUD will automatically start after the vehicle is started, and the vehicle will automatically shut down after the vehicle is turned off. Some vehicles may be delayed for 3-5 minutes.
3. Fix the HUD on the soft rubber base first, or attach the base with the 3M glue attached to fix it.
4. Place the HUD above the instrument panel, select a position where the screen information is clearest, and confirm this position.
5. Open the downloaded Anavi navigation software, click the HUD in the upper left corner for Bluetooth connection, the software will automatically scan to cxat BT, click it to connect to the HUD host. After the connection is successful, the connection will be made automatically afterwards.
6. HUD parameter setting-Click the setting icon in the lower right corner to enter the Setting function, and then click HUD Setting to enter the setting.
7. Download offline map-Click the setting icon in the lower right corner to enter the Setting function, and then click Offine Map to enter the offline map download. Select the country and region you need to download the offline map for use.
S***v –
The thing is pretty busy. The main indicators show. I was more interested in temperature. Navigation works, but with some kind of delay. I did not understand yet, I drove 10 minutes only. Writes at excess speed, it pleases. In general, I am happy, I will continue to study this device
S***v –
M***m –
a very good product. but the navigation isn’t very……
M***m –