Live Navigation Automobile Over-speed Alarm Modification OBD2 Diagnostic Tools Faulty Code Clear Car HUD Head Up Display with Realtime Navigation
In stock
$123.00 $252.00
In stock
Live Navigation Automobile Over-speed Alarm Modification OBD2 Diagnostic Tools Faulty Code Clear Car HUD Head Up Display with Realtime Navigation
| P19 PLUS | OBD2 System | GPS System |
| Display Information | Speed, coolant temperature, voltage,
fuel consumption, RPM, single mileage, total cumulative mileage, travel time, altitude, system time, intake pressure, oil temperature, air-fuel ratio, turbine pressure, intake pressure, acceleration test, brake test, read data stream., Live Navigation |
speed, travel time, satellite time, altitude,
number of satellites, single mileage, voltage, acceleration test, brake test, Live Navigation |
| Alarm | Overspeed alarm, RPM alarm,
High water temperature alarm, Low voltage alarm, Engine fault alarm, Clear fault code, KM/h & MPH Switch, °C & ℉ Switch… |
Overspeed alarm Voltage Alarm, KM/h & MPH |
| Applied to | Available for cars with OBD2 interface | Universal for all cars, buses, trucks.. |
| Packing List | 1 * HUD Main Unit 1 * OBD2 Cable 1 * Non-slip Mat 1 * Clean cloth 1 * User Manual 1 * Original Box |
1 * HUD Main Unit 1 * USB Cable 1 * Non-slip Mat 1 * Clean cloth 1 * User Manual 1 * Original Box |
Live Navigation Automobile Over-speed Alarm Modification OBD2 Diagnostic Tools Faulty Code Clear Car HUD Head Up Display with Realtime Navigation
Tech Specification:
| Product Certificates | CE, RoHS, FCC |
| Environment temperature | – 40 °C— +80 °C |
| Barometric press | 86-106KPa |
| Relative humidity | 10%-95% |
| Environment voice | <=60dB |
| Work voltage | 11V~18Vdc(12Vdc/200mA) |
| Sleep current | <=30mA |
| Display way | On-board Display |
| Display channel | HD LCD Display |
| Reflector transmittance | 98% |
OBD2 working system: Working voltage: 11~18VDC (12VDC/200mA),when the voltage is higher than 24V, please use a USB cable for GPS mode.
It is recommended to unplug the device if your car doesn’t been used for more than one week.
OBD2 System Troubleshooting
1.The screen without any display, and no power
Please do these operations: If OBD cable is tight enough, pull the OBD cable down several times. Try another car to test. Analyze whether the vehicle OBD diagnostic interface is broken. If the OBD diagnosis is bad, it is recommended to repair the OBD interface and connect the device again.
2.When the device powered on, it only shows the car voltage and be automatic power off after 30 seconds driving.
The device is available for cars with OBD2 and EU-BOD protocols(European: manufactured after 2003, Other region: after 2007)
The Product don’t support JOBD and OBDI
Please switch to the GPS system to display using the USB cable. When the device powered on, press the ‘>’ button within 5 seconds to select the GPS system.
3.Inaccurate Speed
First check the speed unit is correct or not, the speed unit including KM/H and MPH, please refer to the setting to switch the unit.
When the device is powered on, long press in‘M’ button for 2 seconds to enter the menu setting.
Short press the ’>’ button to switch to speed adjust option, and short press the ‘M’ button to choose this option, then short press ‘>’ button or ‘<’ button to change the value. Once finished, long press in ‘M’ to save and exit.
(If the dashboard speed is 100 Km/h, but the device displays 105Km/h, just need to adjust the value at 102)
4.Inaccurate Fuel consumption
Check your car displacement, and set the device same as your car(if your car is 2.0L,then change the device value at 2.0L).The fuel consumption can be adjusted, but we don’t suggest to change it ,because all the datas are read from the car ECU directly.
5.The device can not auto power off
Adjust the sleep voltage to 13.2V or 13.6V, then device will power off in 3 minutes.
6.Auto start and stop cars
Change the Power off time to 180s
7. The device crashes in driving, or Hybrid car
Change the power off time to 180 or 300. If still can’t solve, please press ‘ > ’ switch to GPS system.
8.Wrong operation lead to crashes
(1) Please check the OBD interface if connected with other device
(2) Modified and retrofitted cars will cause a crash
Please remove other OBD devices and do the factory reset.
If still not solved, please switch to GPS system.
| Brand Name | VJOYCAR |
|---|---|
| Model Name | P19-PLUS |
| External Testing Certification | ce |
| Electronic | No |
| Hardware Version | Latest |
| Item Height | 7.5cm |
| Item Length | 12.7cm |
| Power | 11V~18Vdc(12Vdc/200mA) |
| Material Type | ABS |
| Item Type | Car Diagnostic Cables and Connectors |
| Special Features | Bluetooth |
| Item Weight | 0.2kg |
| Software Version | Latest |
| Voltage | W |
| Item Width | 3.9cm |
| 2020 new | OBD2 +GPS dual systems |
| Dual systems | Suitable for all cars |
| Apply for | Automobile Modification |
| Display Mode | Car Speed Projector On-Board Computer |
| OBD System Features | RPM, Fuel Consumption, Voltage, Coolant & Oil Temp, total Mileage… |
| GPS System Features | Speed, voltage, time, and altitude… |
| Speed Unit | KMH & KPM Switch freely |
| Turbo/Intake Pressure Unit | Bar & PSI Switch freely |
| Certificate | CE, FCC, RoHS |
| Warranty | 1 year |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
General Inquiries
There are no inquiries yet.
There are no reviews yet.