Intelligent Robot Swimming Pool Cleaner With 18m Cable Bluetooth Remote Control For All Kinds Of Pool 2028 

Intelligent Robot Swimming Pool Cleaner With 18m Cable Bluetooth Remote Control For All Kinds Of Pool 2028

Description:

The 2028 (with remote control) automatic swimming pool cleaner is a new type of highly efficient and energy-saving swimming pool cleaning robot. Through its advanced computer controlled program, it can clean the pool walls and bottom automatically. At the same time, it filters the pool water and gets rid of suspended particles.

1. Rated input voltage: 110(120)VAC / 220(230)VAC
2. Frequency: 50Hz/60Hz
3. Output Voltage: DC 24V
4. Rated input power: 200W
5. Rated output power: 150W
6. Frequency of remote control: 2.4G
7. Cable length: 20m/30m/40m (Base on different models)
8. Cleaning band width: 358mm
9. Filtering capacity: 15m³/h
10. Filtering capability: 400µm (400µm filter bags are suggested to be used at the beginning of the season), Optional: 100µm /200µm
11. Water temperature of use: 10°C – 32°C
12. Creeping speed: 12m/min
13. IP Grade: cleaner-IP68; power supply unit-IPX4
14. Working temperature: 10°C – 40°C
15. Weight of cleaner: 9.5kg (without cable)

Detailed pictures:

The 2028 Automatic Swimming Pool Cleaner consists of power supply unit, cleaner body, caddy (Optional) and remote control. The following are the components cleaner

Operation

Cleaner operation:

Panel A

Panel B

Works after use cleaner:

Removing Cleaner from Pool

The cleaner will power off automatically after one cleaning cycle. Unplug the power cable, pull the cable line slightly and lift the cleaner by carrying the stationary ring on the lock nut .

Note:

1. 1) In order not to scratch the pool wall or damage the cleaner, avoid the cleaner touching the pool wall during carrying out from pool.
2. 2) Before carrying outside from pool, suspend the cleaner above water for about 10-15 seconds to release the water remaining inside the cleaner.
3. 3) To carry out the cleaner from pool, please hold the top handle only, never pull cable.

4)Put the cleaner on the edge of pool, open the lock nut, and remove the top cover. Then take out the filter cartridge and take off the filter bags.