Pet (Dog & Cat) GPS Tracker Tracking Device GPS WIFI Locator Waterproof 400 Hours Standby Time App Web Tracking

Pet (Dog & Cat) GPS Tracker Tracking Device GPS WIFI Locator Waterproof 400 Hours Standby Time App Web Tracking

Does not include Sim Card
1.Really confirm the package no include Sim card, customers need to buy the sim card in your local market.
2. Mini Pet Dog Cat Animal GPS Tracker
Waterproof IP66
GPS
WIFI

Summary
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. The most advanced technology of GPS and GSM dual positioning.

1. Specification:

2. Hardware Description

Note: GSM SIM CARD INSTALLATION GUIDE: Only GSM SIM card works in this model

3.TURN ON THE DEVICE

1. Once the SIM card has been purchased and credit added, unscrew the tracker using the screwdriver to remove the 4 small screws in each corner.

2. Then, insert the SIM card into the SIM card holder by push the metal piece forward and lifting it up, Place the SIM-card into the card slot, Press the metal piece back into its original position and push the metal piece back into place.

3. Ensure you place the SIM card with the chip face down and the right way round, clip the holder into place and re-screw up the unit.

4. Turn on the unit outdoors by pressing the “on/off” button until the indicator is on.

5. In 30 or 60 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals. The indicator will keep flashing every 3 seconds when the unit has received the signals.

When this unit receives GPS signals normally, you can use it and do any setting as the instructions of this manual.

4.SMS TRACKING

4.1. Call the SIM card phone number in tracker,you will receive a Google Maps link of position,

or sending message “G123456#” to SIM card phone number in tracker .

E.g:

4.2. Admin number setting (After admin number setting, all SMS operations to the device are under this number only.) Command: admin123456 phone number(This phone number is your own mobile phone number , not the SIM card number in tracker .) Reply admin ok E.g admin123456 13265790180 When the unit is in over-speed alarm, shake sensor alarm, or low battery alarm, it will send alert to the admin number.( 13265790180 ) Admin number Canceling: Command noadmin123456 Reply noadmin ok 4.3. Over-speed Alarm setting( It works only in continuous positioning mode.) Over-speed Alarm setting: Command speed123456 070 (Suppose speed is 70km/h) Reply speed ok E.g When the unit speed is over 70km/h, it will send message “speed alarm!” to the admin number every 5 minutes. Over-speed Alarm canceling Command nospeed123456 Reply nospeed ok 4.4. Shake Alarm setting Command shock123456 Message Reply shock ok E.g Note:Pls keep the tracker being stationary for 5 minutes, this function will work. The tracker will send SMS “sensor alarm!” to the admin number when the unit get shocked. Shake alarm Canceling: Command noshock123456 Reply noshock ok 4.5. Device working mode setting Sleep by time mode setting Command sleep123456 time Reply sleep time ok E.g (Tracker only works for 5 minutes after being waked up, and back to sleep mode, GPS shut off, GSM works in low consumption mode. SMS command, calling tracker can wake up the tracker.) Sleep by shock sensor mode setting: (Factory setting is “Sleep by shock mode“) Command sleep123456 shock Reply sleep shock ok E.g (No shock for 5 minutes, the tracker will work in “sleep by shock” mode, GPS shut off, GSM works in low consumption. Vibration, SMS, calling can wake up the tracker.) 4.6 Terminal (local) Time Setting(factory setting GMT 0) Command :timezone123456 local time zoneRep:time ok! E.g: timezone123456 +1 timezone123456 -1 Timezone123456 0 4.7Reset Hardware Command:begin123456 Reply:begin ok E.g: 5. EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE Pic 1:Replied real-time tracking information under GPS satellites signal. Lat:22.63952 lon:114.17122 Positioning of the latitude and longitude values. Spd:000 This refers to the device moving speed. The unit is km/h. T:24/09/15 16:00 real-tracking time, the Default is London time. You can set language and time zone in APP. Bat:100% The battery value is between 10% and 100%. Once it is less than 30%, it alarms. 2015070203: Device IMEI No. to log in APP and platform.
Google Link: This is the link to the Google map showing the position of the device.

2:Replied LBS tracking information without GPS satellites signal. Lac:27a4 1223:Real-time LBS positioning data. T:24/09/15 15:17 LBS positioning time. Bat:100% The battery value is between 10% and 100%. Once it is less than 30%, it alarms. Last:T:25/09/15 03:04 This is the time when tracker got last GPS signal Google Link: This is the position of last gps signal appeared 6. 0 START ONLINE TRACKING Pls activate GPRS by sending command “gprs123456” when the tracker is on, and set APN by following steps. Every sim card carrier has own APN content, we have two methods to find out apn content : check sim card carrier on internet or put sim card into cell phone to find out APN
Two steps to set apn:
1). Turn on gprs function by sending command “gprs123456”
2). Set apn by sending command “apn123456 content” , “apnuser123456 content” ,“apnpasswd123456 content” pls note the content is from SIM card carrier, there is small blank after 123456 in every command. 6.1
WEB ONLINE TRACKING Platform: www.mytkstar.net Select “Log in by IMEI” on the bottom of screen IMEI No. : on the back side of cover Password: 123456

Select “Log in by IMEI” on the bottom of screen Server: www.mytkstar.net
IMEI : on the back side of cover Password: 123456 6.3
Turn on GPRS function by sending command “GPRS123456” to the tracker, and set the APN for the tracker, then its online tracking by APP and platform works. (if you did it already in 6.0, no need to it one more time)

Package Include: host *1 collar *1 screwdriver cable*1 manual*1